产品高清图片
产品规格书
HL-R8192EU5
IEEE 802.11b/g/n 2T2R USB WiFi Module
特性Features：
Ø接收制式Reserving System
IEEE Std. 802.11b
IEEE Std. 802.11g
IEEE Std. 802.11n
Ø结构大小Size
46.45mm x 40mm x 6.5mm
Software Requirements
The driver supports the following operating systems: Linux, Microsoft Windows 2000, XP, Vista andWin7.
1.Introduction
HL-8192EU5 is based on RealtekRTL8192EUcomplied with IEEE 802.11b/g/nstandard from 2.4-2.5GHz.This documentation describes the engineering requirements specification.
1.1 RF module Overview
The general HW architecture for the module is shown in Figure 1. This WLAN Module design is based onRealtekRTL8192EU. It is a highly integrated single-chip MIMO(Multiple In Multiple Out) Wireless LAN (WLAN) USB2.0 network interface controllercomplying with the 802.11n specification. It combines a MAC, a 2T2R capable baseband,and RF in a single chip. TheRTL8192EUprovides a complete solution for a highthroughput performance wireless client.
Figure 1 HL-8192EU5 Block Diagram
1.2 Specification reference
This specification is based on additional references listed below.
_IEEE Std. 802.11b
_IEEE Std. 802.11g
_IEEE Std. 802.11n
1.3 System Functions
Table1: General Specification as below:
2.Mechanical Specification
2.1 Mechanical Outline Drawing
Typical Dimension (W x L ): 46.45mmx 40.mm x 6.5mm
2.2 WTB CONNECTOR Pin definition
5Pin, 1.25mm pitch, SMD, side entry type
3.Electrical Specification
This Specification is based-on conductive DVT testing result. The extreme condition include overall temperature (0℃,+25℃,+60℃) and overall voltage (4.5V,5V,5,5V).
3.1 802.11b Mode
3.2 802.11g Mode
3.3 802.11n HT20 Mode
3.4 802.11n HT40 Mode
3.5 On-board Antenna Specification
4.Packing
